Walpersdorfer Str. 38 91126 Schwabach Tel.: +49 (0)9122 - 63148-0 Fax.: +49 (0)9122 - 63148-29
Homepage-Sicherheit
SFU 0200/2
All around solution for all applications with low voltage spindles Highest efficiency and 28,5 kHz while spindle drive minimize power losses in the spindle Powerful spindle drive with high output power reserves High safety because of galvanically separation of spindle lines from mains network For all temperature sensors: PTC, KTY and PT1000
SSE
Manual Continuous  output power Supply connection                                                                                                                                                                                 ,                                                                   Fuse                                                               , 230V:                                                      115V: 3,15AT                                                                                                 5,0AT Output voltage Continuous phase current Peak phase current Over current Output frequency Motor connection                                                                                                                                                                                                                 Desktop:                                                                                                                                                                                                                                       circular jack:                                                3-pin or 7-pin                                                              pluggable screw terminals:                                           2,5mm² 6-pin SSE & 19":                                screw terminals 4mm²                  8-pin: U,V, W, PE, PTC, FP,  SGND Spindle  characteristics: Control inputs 1 Analog:                                                                 0-10V 3 Digital:  0-24V Control outputs 1 Analog:                                                                          0-10V 2 Digital:                 relay outputs,      24VDC/1000mA,                                     125VAC/500mA Spindle sensor  inputs Interface                                             max. dimensions                                   W x H x D (mm)                                     Desktop:                                                                                   SSE:                                                                                   243 x 94 x 268 90 x 312 x 268 Weight Desktop:                                                                                   SSE:                                                                                   ca. 6,0 kg ca. 6,5 kg Protection Operating conditions max. 16, stored internally 230V, 50Hz / 115V, 60Hz                                                             switchable with rotary switch and  with exchange of fuse TECHNICAL DATA 480 VA / S1-100% max. 60V 7,0A 8,5A to be set up for max. 20s AC: 4.000Hz  /  240.000 rpm                                                     DC: 1.667Hz  /  100.000 rpm                                                                                     5 - 40°C / rel. humidity of air max. 85% RS232 IP20 speed sensor, PTC, KTY, PT1000 Accessories
Homepage-Sicherheit
Profibus Profinet etc… SFU-Communicator:
back
SFU 0200/2
Manual Continuous  output power Supply connection                                                                                                                                                                                 ,                                                                   Fuse                                                               , 230V:                                                      115V: 3,15AT                                                                                                 5,0AT Output voltage Continuous phase current Peak phase current Over current Output frequency Motor connection                                                                                                                                                                                                                 Desktop:                                                                                                                                                                                                                                       circular jack:                                                3-pin or 7-pin                                                              pluggable screw terminals:                                           2,5mm² 6-pin SSE & 19":                                screw terminals 4mm²                  8-pin: U,V, W, PE, PTC, FP,  SGND Spindle  characteristics: Control inputs 1 Analog:                                                                 0-10V 3 Digital:  0-24V Control outputs 1 Analog:                                                                          0-10V 2 Digital:                 relay outputs,      24VDC/1000mA,                                     125VAC/500mA Spindle sensor  inputs Interface                                             max. dimensions                                   W x H x D (mm)                                     Desktop:                                                                                   SSE:                                                                                   243 x 94 x 268 90 x 312 x 268 Weight Desktop:                                                                                   SSE:                                                                                   ca. 6,0 kg ca. 6,5 kg Protection Operating conditions max. 16, stored internally 230V, 50Hz / 115V, 60Hz                                                             switchable with rotary switch and  with exchange of fuse TECHNICAL DATA 480 VA / S1-100% max. 60V 7,0A 8,5A to be set up for max. 20s AC: 4.000Hz  /  240.000 rpm                                                     DC: 1.667Hz  /  100.000 rpm                                                                                     5 - 40°C / rel. humidity of air max. 85% RS232 IP20 speed sensor, PTC, KTY, PT1000